Advanced Materials

Advanced Materials

3M™ Dyneon™ Fluoroplastic PFA Series

제품 개요

3M™ Dyneon™ Fluorothermoplastics


제품 설명

Nominal values, not for specification purposes


상세정보

 

Physical Properties Test
Method
Test
Condition
Unit PFA 6502NZ
PFA 6502TZ
PFA 6502UHPZ
PFA
6503PAZ
PFA
6505TZ
PFA 6515NZ
PFA 6515TZ
PFA 6515UHPZ
PFA
6525TZ
PFA
8502ESDZ
PFA FLEX
8502UHPZ
PFA FLEX
8515UHPZ
Physical Form, G = Granules
(Pellets), P = Powder
      G P G G G G G G
Specific Gravity DIN EN
ISO 12086
    2.15 2.15 2.15 2.15 2.15 2.11 2.15 2.15
Melting Point DIN EN
ISO 12086
    308 308 308 308 308 278 290 290
Melt Index (1) DIN EN
ISO 1133
    2 3 5 15 25 2 2 15
Mechanical Properties                    
Hardness ISO 868 Shore D   60 60 60 60 60 - - -
Tensile Strength (23 °C) DIN EN ISO
527-1
test speed
50 mm / min
  34 - 34 29 25 30 35 34
Elongation at Break (23 °C) DIN EN ISO
527-1
test speed
50 mm / min
  360 - 385 400 380 290 330 350
Flexural Modulus (23 °C) ASTM D
790
injection molded
bars 127 by 12,7
by 3,2 mm
  550 - 550 620 630 - 600 600
Izod Impact Strength ASTM D
256
23 °C notched   - - - - - - - -
    -40 °C notched   no break - - no break - - - -
    -40 °C unnotched   no break - - no break - - - -
Electrical Properties                    
Dielectric Constant (23 °C) ASTM D
150
@ 1 MHz   < 2.10 - - < 2.05 - - 2.02 - 2.08 2.02 - 2.08
    @ 9.4 MHz   - - - 2.05 - - - -
Dissipation Factor ASTM D
150
@ 1 MHz   < 0.0005 - - < 0.0005 - - < 0.0003 < 0.0003
    @ 9.4 MHz   - - - - - - - -
Dielectric Strength ASTM D
149
0.25 mm film kV/mm - - - - - - - -
Thermal Properties                    
Limiting Oxygen Index (LOI) ASTM D
2863
  % > 95 - > 95 > 95 > 95 - > 95 > 95
Thermal Glass
Transition (Tg)
ASTM D
4591
  °C - - - - - - - -
Heat Deflection
Temperature
ASTM D
648
0.45 MPa °C - - - - - - - -
Vertical Burn UL Bulletin
94
    V-0 - - - - - - -
Optical Propertie                    
Refractive Index ASTM D
542
100 μm film   1,346 - - 1,345 - - - -
UV-Vis Light Transmission straight
light only
300 nm,
100 μm film
% 79 - - 65 - - - -
  straight
light only
600 nm,
100 μm film
% 95 - - 90 - - - -
Chemical Resistance (2)                    
Biodiesel       + - + + + - + +
Sulfuric Acid (H2SO4 )       + - + + + - + +
Sodium Hydroxide       + - + + + - + +
Ethanol       + - + + + - + +
Acetone       + - + + + - + +
Toluene       + - + + + - + +
Reference Fuel C       + - + + + - + +
Reference Fuel C/MeOH
(85/15)
      + - + + + - + +
       

 

    Also available
as glass filled
grade (PFA
6510GV15WZ)
Also available as
black pigment
grade
(PFA 6515NZS)
       

 


  1. 3M™ Dyneon™ Fluorothermoplastics

  2. 3M™ Dyneon™ Fluorothermoplastics Dispersions

  3. No Image

    3M™ Dyneon™ Fluoroplastic PFA Series

Board Pagination Prev 1 Next
/ 1